To connect at least two computers with a single wireless network bridge, first and foremost, you have to install each computer with an adapter. After this, run CAT5 cables to connect all of them to a switch or a hub. Your chosen computer to use with bridging will come with two kinds of inserted adapters in its mainboard: one regular LAN adapter, which should already be inside, and one wireless network adapter, which will help make a connection to your wireless access point (WAP).
After installing and connecting these network adapters, use your intended bridging computer to open the Control Panel and then go to Network Connections. Keep in mind that to create your wireless network bridge, a minimum of two connections will be needed for various processes. Such processes would be internet sharing (ICS) and internet firewall (ICF).
Once you are inside the folder of Network Connections, you should see a ton of connections. Every connection is actually every one of the network cards: one is for the wireless card, while the other is for the wired card. Open your wireless adapter’s connection and visit the details panel. This should show that it works perfectly. Now, it would be advisable to check your Ethernet connection, too; this should work perfectly, too. Now you simply have to click on both of these connections simultaneously – which can be done by selecting every connection while holding the Ctrl key – and then right-click on any connection to select the submenu of Bridge Connections. After configuring this bridge connection, a window to Network Connection should be seen.
ICF and ICS
ICF and ICS might be needed in several cases. Regardless of the reason, you will require a third adapter first. So, if you do need ICF or ICS, you will need to go to a local store for computer hardware to get a brand new adapter card. But even if you have three adapters, this task would be quite tricky. Making a bridge in this manner would require you to bridge before actually enabling a single one of them.
You could always make use of the setup wizard when it comes to such tasks; however, the overall order would be imperative. You first need to use its setup wizard in order to make a bridge before enabling ICF or ICS. The wizard will then search for an online connection and attempt to configure this. Lastly, if you want, you can bridge several more network cards, which are connected onto the network.
By: Alex D Smith
Posts Tagged ‘Switch Hub’
Setting up a Network — Wired or Wireless?
November 19th, 2009
To Wire or Not to Wire
Wireless networks are en vogue, but your installation won’t be successful unless you chose the right type of network and set it up properly. Wired networks require that each computer be connected via a wire to a central location, called a switch or hub. This often involves installing cables through walls and ceilings and can present a challenge for anyone.
If the computers in your home or office are all within 500 feet of each other, a wireless network might be for you. A wireless network has no cables. It can connect computers on different floors of a building or even across the street. Aside from the obvious benefit of not having wires, wireless networks are more convenient since the setup, configuration, and reconfiguration can often be done within minutes, without extensive planning.
Wireless networks, however, are not as fast as wired networks. If you play computer games or want to view streaming video or other high-speed multimedia, a wireless network might not have enough capacity. But, if you just want to check e-mail and view web pages, a wireless network is a good choice. To install a wireless network, you need a Wireless Access Point and a wireless network card for each computer. You will need to buy a wireless network card for each desktop computer, although most newer laptops come equipped with one.
Security is not a large concern in a wired network, since someone would have to physically connect to a wired network to break in. In wireless networks, a car parked outside with a laptop could easily connect to your network if you don’t have proper security in place. To prevent this from happening, encrypt your wireless network connections, or set a password to access the network, or do both.
Do It Yourself or Call a Professional?If you decide to use a wired network, consider whether you will install it yourself or hire a professional. If you have a small number of computers that are all situated very close to one another, you may be able to buy pre-assembled network cables and connect them yourself. If you need to wire multiple floors and lay wire through ceilings and walls, you need a professional installation. If you go this route, it is best to begin with a floor plan of your office or home, determine what your current needs are, and consider how the network design can be adapted to future needs. A professional installer should be familiar with EIA/TIA standards, local wiring and electrical codes, and making custom cables. Network cabling professionals are often judged by the neatness of their work, because sloppy cabling is more apt to deteriorate over time, harder to manage, and poses more of a fire risk.
Having a wireless network or a wired network is not mutually exclusive. Many small offices have a wired network in addition to one or more wireless networks, depending on their needs. Wireless networks are continuing to get faster, more secure, and less expensive. Wired networks will continue to coexist with wireless networks, often in the same homes and offices.
By: Deryck Richards
