Wireless networks are getting more popular as more days go by. They are easy to install and practical to use when it comes to surfing the World Wide Web from anywhere inside the house. This is why wireless networks are attractive in the eyes of internet users. It is fairly easy to set up a wireless network; however, you have to know several simple things before trying to begin your setup. To get better understandings of wireless networks, you can read on protocols of wireless networking.
To set up your wireless network, you would require a broadband online connection with either a DSL modem or cable. Usually, the regular home setup involves a desktop computer that is directly plugged into a modem. If you are reading this, we can presume that you already own a laptop which you wish to wirelessly connect to a personal computer which has an internet connection. You will require some hardware to do this, such as a wireless router, a wireless USB network adapter for your desktop computer and a card-based personal computer network adapter for the laptop. Obviously, it would be recommended to opt for the same vendor as any extra hardware that you purchase. Refer to documentations that come with the hardware for any process of installation.
After installing all of the required hardware, you can start with the setup. First of all, you have to turn off or unplug your DSL modem before connecting your wireless router onto the modem. If you need help, simply check your hardware’s documentation. After this has been set up, your computer is going to connect to the router wirelessly. Next, you have to configure the wireless router. You can use Internet Explorer to go to the configuration page of your router.
The majority of default settings are safer to be left alone; however, there are several things that will need configuring. You have to choose a one-of-a-kind SSID or name for your wireless network, which will also be your network’s name. Ensure that nobody near you is making use of the exact same name. Next, if the router needs it, provide a one-of-a-kind passcode which it will put to use in order to generate several keys. The last thing to do before finishing your router configuration would be to set an administrative password. Pick a password which is long and hard to guess for security purposes. Ensure that you save each configured setting. Actual steps that are involved with setting configuration may vary, depending on your type of router.
Next, configure the network adapter of your laptop. It is quite easy to follow the on-screen instructions on Window’s XP when it comes to this. Right-click on the wireless network icon within your taskbar and go to “View Available Wireless Networks” after the menu appears. The window of Wireless Network Connections will show up. Here, you should see your chosen name listed for the wireless network. Click on “Refresh network list”, if the network does not appear. After that, you will be asked to enter a key as you have written down within the key boxes of Confirm network key. Choose Connect. Then, you will see the progress of your connection while it connects to the network. Once you are connected, feel free to close this window. Your wireless connection is now set up.
By: Alex D Smith
Posts Tagged ‘Ssid’
A Step-By-Step Guide to Setting Up a Wireless Network
March 1st, 2010Securing Your Home Network
February 20th, 2010
You have probably read about how people are able to gain access to an individual’s computer and essentially steal all their personal data. There are many ways that this can be done without the owner even knowing that someone is trawling around within their computer right under their nose. There a few simple steps that you can do to safeguard your personal information from internet predators.
Your home network is your first step to securing your personal data from the outside. You should have a secure perimeter network that stops any potential intruders from accessing your data. It is by far better to stop intruders at the perimeter rather than at your computer. Make sure that you have a hardware firewall enabled at the point where your home equipment connects to your internet connection. Hardware firewalls are more difficult to hack and do a good job of keeping unwanted eyes from seeing your personal computer.
A hardware firewall for homes normally comes in the form of a router. Some people have a modem connected to their internet connection but these do not come with a hardware firewall and are not secure. Make sure that you are using a router with a hardware firewall between your computer and the internet connection. If you are not sure which one has been supplied by your service provider, have a look at the original documentation or phone your service provider and ask them.
Most routers provided by internet service providers are wireless. This means that if you have a laptop, you can connect to the internet using a wireless network card from your laptop to the router, and finally out onto the internet. Even if you don’t have a laptop and use a desktop computer, the router from your service provider will still have the wireless functionality enabled. This wireless connection broadcasts a name called an SSID. This can be picked up by any wireless device normally within a 50m radius of your home. You need to make sure that the wireless broadcast is switched off if you do not use it. If you have a laptop and use it to connect to the internet wirelessly, make sure that it uses an encryption key to secure all communications. The older type of encryption is WEP and is now less secure; you should be using WPA which is more secure. Read the documentation that came with the router on how to configure encryption on your router.
By: Mike JJ Johnson
Wireless Network Installation and Configuration
October 19th, 2009
You might just be at that point, where the small, wired home network you created a few months ago just is not doing it for you anymore and you want to extend it with a wireless network. Of course, you might as well be at that point, where you want to build a completely new network. Whichever the reason may be, the problem is the same – you need to know exactly how to do a wireless network installation.
Most of the time, you will find it necessary to install a wireless router. Now, you will only need to install one of these if you either are building your first home network or simply want to keep the wireless network installation at the simplest level as possible. Remember to install the router in a somewhat central location in your home so this way all receivers will be almost in the same line of sight. You see, with wireless internet, the speed depends on the distance from the router to the receiver. All you have to do now is connect your router to a power source, and of course an Internet source. Nowadays many routers support broadband modems and even dial-up connections. Still, when you buy a router make sure that it has an RS-232 serial port if you need the dial-up connection, because otherwise you will find yourself having a useless router. Last, but not least, you can also connect a wired router (called a switch or a hub) because wireless routers generally do contain built-in access points.
Now choose the name of your network. Often with Wi-Fi the network names are generically called SSID. Of course, this SSID has to be identical with all computers that are sharing the same wireless router. For your own protection, it is recommended that no matter what name your router manufacturer set to change it to something else. In order to find a network name for your router all you have to do is consult the product documentation. Finally, read the documentation to find out how to handle WEP security and also how to turn on firewall features and how to set other options.
Wireless Access Points
One wireless type network connection is supported by only one access point. It is very important to remember this further on. It is recommended to use this type of access point only if you indeed need the features that only a wireless router can provide and also you want to have more than three or four computers around the house that will be connected to the internet. You can read more at http://www.howtosetupwirelessnetwork.com
The positioning rule is the same as with wireless routers – access points have to be placed in a central location so that all receivers will be in the same line of sight. Plug in the power cord and if necessary the dial-up internet connection as well. Now cable the access points to your hub or switch. In this case, you will not have to configure any firewalls at all, yet you will still have to set a network name and enable the WEP function.
Giving these two options of installing a wireless network in your house, from this point on, all you have to do is install them in your own operating system and you’re good to go.
By: Dean Forster
