As Wi-Fi hotspots are mushrooming all over the world, they let people have the chance to get rid of those inflexible network cables and surf on the net wirelessly in the WLAN. However, a high-performance wireless Internet access is not an easy thing for some users, because when contacting with your wireless network, your wireless network adapter may probably meet a lot of strange failures, which may seriously affect your networking experience if you don’t fix them in time, and the blue screen is one that among those common failures.
If blue screen shows on your computer immediately after you installed a wireless network card, above all, you need to check whether the net card driver you installed is compatible with your operating system, for example, if your driver is only available in Windows 2000, but you have installed it in Windows XP, well then your computer would be more likely to have a blue screen. Therefore, make sure you have installed the correct network card driver.
If your driver is compatible with your system and has been installed properly, you need to go through the installation of this network adapter, and check whether it has inserted to the right slot or port properly, for if you pull out the card from its PCMCIA port on the motherboard or its USB port just a few seconds after plugging it, blue screen would lightly happen, because frequent pullout and plug may make network adapter’s corresponding port confused and fail to identify this adapter. Additionally, if you pull out your net card suddenly when its LINK light is blinking, that would also leads to blue screen, or even worse, your computer or your network card’s port would be damaged.
By: Molly Smith
Posts Tagged ‘Pcmcia Port’
Wireless Network Card Troubleshooting – Computer Crashes
December 5th, 2009
As the technology advances, now many devices can support hot plug, such as USB devices and 1394 devices. However, essentially, most hardware operations should be completed after the power supply is cut off, otherwise it may cause computer crashes or even the permanent damage to the hardware.
Sometimes computer may go dead if the wireless network card is pulled out suddenly from its related port. This failure occurs in a relatively high frequency. The reason why this failure happens is that many PC users think this wireless network card’s USB port or PCMCIA port supports hot plug, and it can plug and play. Actually, they take this plug-and-play function as random plug and few of them know that this wireless NIC card should not be plugged when working, for it is not only easy to hurt the card and its corresponding computer interface, but also likely to cause system crashes.
If your computer freezes up because of wireless network adapter plug, firstly, you need to confirm whether you have performed this action when the card is working, if so, you have to restart your computer.
In addition, in order to avoid this error, you’d better stop processes like information transmission and it’s best to disable your wireless network adapter in Device Manager before pulling out it.
Step 1 Click Start and select Control Panel.
Step 2 Double-click System to open the System Properties sheet.
Step 3 Click Hardware and choose Device Manager.
Step 4 Right-click the Network adapters and look at its properties.
Step 5 Disable and plug this card.
By: Molly Smith
