To connect at least two computers with a single wireless network bridge, first and foremost, you have to install each computer with an adapter. After this, run CAT5 cables to connect all of them to a switch or a hub. Your chosen computer to use with bridging will come with two kinds of inserted adapters in its mainboard: one regular LAN adapter, which should already be inside, and one wireless network adapter, which will help make a connection to your wireless access point (WAP).
After installing and connecting these network adapters, use your intended bridging computer to open the Control Panel and then go to Network Connections. Keep in mind that to create your wireless network bridge, a minimum of two connections will be needed for various processes. Such processes would be internet sharing (ICS) and internet firewall (ICF).
Once you are inside the folder of Network Connections, you should see a ton of connections. Every connection is actually every one of the network cards: one is for the wireless card, while the other is for the wired card. Open your wireless adapter’s connection and visit the details panel. This should show that it works perfectly. Now, it would be advisable to check your Ethernet connection, too; this should work perfectly, too. Now you simply have to click on both of these connections simultaneously – which can be done by selecting every connection while holding the Ctrl key – and then right-click on any connection to select the submenu of Bridge Connections. After configuring this bridge connection, a window to Network Connection should be seen.
ICF and ICS
ICF and ICS might be needed in several cases. Regardless of the reason, you will require a third adapter first. So, if you do need ICF or ICS, you will need to go to a local store for computer hardware to get a brand new adapter card. But even if you have three adapters, this task would be quite tricky. Making a bridge in this manner would require you to bridge before actually enabling a single one of them.
You could always make use of the setup wizard when it comes to such tasks; however, the overall order would be imperative. You first need to use its setup wizard in order to make a bridge before enabling ICF or ICS. The wizard will then search for an online connection and attempt to configure this. Lastly, if you want, you can bridge several more network cards, which are connected onto the network.
By: Alex D Smith
Posts Tagged ‘Network Cards’
Home Based Business Network System – Lesson 1
February 10th, 2010
If you are planning to run your own home based business then you will need to set up a home network. You will need a computer, a printer, then a copier and as your business grows you will find out that you need more and more sophisticated equipment to automate and make your home based business not only easier to manage but also a pleasant experience, something that you enjoy to do.
So what is a home network?
It is simply the computer network that you have in your home. In other words the computers, equipments and all the accessories that you connect together form your home network.
For your home based business network, you will need cables or radio beams to make the connection from one computer or equipment to another. These two basic options make up the difference between what is called a cabled or wired network versus a wireless network.
Cable connection used to be the primary way of connecting your network but with advances in technology it is now cheaper and less clumsy to create a wireless network.
When using cable connections, there are junctions called nodes that can be in the form of computers, switches or routers.
Switches.
They provide a place to plug the cables and therefore allow physical connections between communicating computers and other equipments.
Routers.
Routers on the other hand perform a similar purpose but with more functions and capabilities. For instance routers have the ability to connect multiple networks together and at the same time route traffic intelligently between them, something that the switches can not be able to perform.
Computers.
Computers have become very sophisticated as time passes by. Most computers now days perform these functions by themselves without the need of using external switches and routers.
Software within the computer system can use the network cards in each computer, with a simple switch in between, to allow communication between them. If your needs are fairly simple then computers by themselves can be the cheapest and easiest way to create a Home based business network.
Home Based Business Network System.
But again if on the other hand you home based business network is fairly advanced and requires more complicated connection then definitely you will need routers and some switches.
Let me also point out here that there are also other possible components you will need in order to fully set up your home network. Familiar devices that go under the general name of peripherals are often part of the home network, for instance you might need a printer, fax or scanner among multiple computers.
Also for your home based business network you will need to include a firewall. This is a software/hardware that allows the passage of information sent by trusted sources, but blocks other types of data from being send or received from other non trusted sources.
It is essential that you home based business network system stay protected by using a firewall. The good thing is that most routers if not all typically contain some inherent firewall functions.
Lesson 2 on home networking continues tomorrow.
By: Joseph Nyamache
How to Deal With Dual Network Cards Conflict
December 29th, 2009
Many people now have two computers, as to enable both to access the network, they often make use of the dual network cards to connect their computers and make them as a local area network (or LAN), which would cost much less than purchase a router. However, sometimes due to the model and the quality of these two adapters or your PC compatibility problems, they have a conflict. How can we tackle it?
Using dual NIC cards to access the network is only a temporary plan, if there is some problem when applying the double cards connection, we should consider troubleshooting it from the aspects below:
Computer restart
Generally when you finish installing some software, Windows prompts you to restart; sometimes you think it a troublesome and reboot the computer till all software has been installed. You’d better restart your PC when installing the first net card and then turn to set up the next one. Because when installation is over, the system not only would assign the interrupt request and the memory available resource to you network adapter, but also configure the port and the IP for it, actually it is more convenient for your PC to carry out its work by rebooting and then installing the next adapter.
Net card speed and connections
When you build the network, you should think over the communication problem between the 10/100M and 10M network adapters: when they are interconnected in two computers, you would probably find that they are not reachable across the IP network, or they are shown connected normally but you can not browse the website. Such errors often happen when two net cards with different transmission speeds exchanging their data packs. To resolve this failure, you can try to contact your 10/100M network adapter to the external line and use an adapter with the same speed in the inner connection.
By: Molly Smith
