Posts Tagged ‘Computer Hardware’

How to Set Up a Wireless Network Bridge

March 12th, 2010



To connect at least two computers with a single wireless network bridge, first and foremost, you have to install each computer with an adapter. After this, run CAT5 cables to connect all of them to a switch or a hub. Your chosen computer to use with bridging will come with two kinds of inserted adapters in its mainboard: one regular LAN adapter, which should already be inside, and one wireless network adapter, which will help make a connection to your wireless access point (WAP).

After installing and connecting these network adapters, use your intended bridging computer to open the Control Panel and then go to Network Connections. Keep in mind that to create your wireless network bridge, a minimum of two connections will be needed for various processes. Such processes would be internet sharing (ICS) and internet firewall (ICF).

Once you are inside the folder of Network Connections, you should see a ton of connections. Every connection is actually every one of the network cards: one is for the wireless card, while the other is for the wired card. Open your wireless adapter’s connection and visit the details panel. This should show that it works perfectly. Now, it would be advisable to check your Ethernet connection, too; this should work perfectly, too. Now you simply have to click on both of these connections simultaneously – which can be done by selecting every connection while holding the Ctrl key – and then right-click on any connection to select the submenu of Bridge Connections. After configuring this bridge connection, a window to Network Connection should be seen.

ICF and ICS

ICF and ICS might be needed in several cases. Regardless of the reason, you will require a third adapter first. So, if you do need ICF or ICS, you will need to go to a local store for computer hardware to get a brand new adapter card. But even if you have three adapters, this task would be quite tricky. Making a bridge in this manner would require you to bridge before actually enabling a single one of them.

You could always make use of the setup wizard when it comes to such tasks; however, the overall order would be imperative. You first need to use its setup wizard in order to make a bridge before enabling ICF or ICS. The wizard will then search for an online connection and attempt to configure this. Lastly, if you want, you can bridge several more network cards, which are connected onto the network.

By: Alex D Smith

Computer Hardware Network Security

November 27th, 2009



The term global village has become more realistic than fictional after the widespread use of the internet in all countries in the world. What the internet does is effectively computerizing the globe. Like many other things, the internet provides good and bad things. The consensus is that the good things far outnumber the bad things. But the questions posed regarding data security are serious ones. Since more and more institutions such as military, diplomatic, and financial institutions are relying on the internet or some other kinds of network for transferring data and streamlining the process, the number of people who try to misuse such data is also on the rise. To prevent this various kinds of data security measures are adopted by network administers. A majority of the data security measures are related to software applications. Computer hardware network security options are also used.

To understand the importance of data security, consider the case of a bank that has branches all over a country. For streamlining the operation, most of the banks set up a private network or a network connected with the internet to transfer financial data. A person with sufficient software and hardware knowledge can sneak into this network without permission and change the data according to his or her will. Such people are nicknamed hackers. In the case of a bank, since change of data means change or loss of money, implementation of state of the art security measures for protecting the data is absolutely essential.

The hardware components needed for a network are computers with network cards and nods for connecting these computers with each other through physical connection such as cable or through electronic signals via satellite. One will also need network and database management software for the effective functioning of the network. In most of the networking arrangements, one computer, known as the server, acts as a source and other computers act as nods of that central computer.

Normally, there are elaborate security arrangements for preventing unauthorized persons from logging in to a network. Software precautions like firewall, anti-virus and anti-hacking software packages, and encryption technologies have been widely used. Such systems are absolutely necessary to prevent data theft and other malicious intentions. The problem with software packages for network security is that such packages will be outdated after a particular period. Hackers usually understand how to get around the software packages after a certain period.

So, a computer hardware network security device is a better choice. Top network router manufacturing companies provide hardware firewall arrangement for both kinds of network systems: Ethernet and wireless. The firewall settings can be easily adjusted. Several companies also offer virtual private network devices for network security. But the important thing for providing watertight security for your network is that you need to constantly update the hardware and software requirements.

By: Candis Reade